Handbook of Coil Winding - Technologies for efficient electrical wound products and their automated production

This book presents the current coil winding methods, their associated technologies and the associated automation techniques. From the introduction as a forming joining process, over the physical properties of coils, the semifinished products (wire, coil body, insulation) are introduced. In the process chain, different winding methods are used for magnet wire winding. Finally, the automation of these processes is described.


Dipl.-Ing. Jürgen Hagedorn has about 30 years of professional experience in coil winding technology. Since 2002, he has been working on the process development at Aumann GmbH.
Dr.-Ing. Florian Sell-Le Blanc has been the head of pre-development at Aumann GmbH since 2016. From 2011 to 2015 he was an academic assistant in the Department of Machines, Systems and Process Automation at the Karlsruhe Institute of Technology (KIT).
Prof. Dr.-Ing. Jürgen Fleischer has been the head of the Institute of Production Science since 2003 at KIT. Previously he worked in different management positions in research and development, planning and production at Daimler-Benz, ABB Daimler-Benz Transportation and as a President Regional and Commuter Trains at Bombardier Transportation. From 2008 until he was the Chairman of the Executive Board of the international Machine Tool Group MAG Industrial Automation Systems during a sabbatical from his academic position.